BGQKB - POSITRACTION ADDITIVE 1052358
- MSDS: BGQKB
- Manufacturer: RALPH SHRADER INC
- Product Name: POSITRACTION ADDITIVE 1052358
- National Stock Number: 9150-01-198-3829
Product Identification
Product ID:POSITRACTION ADDITIVE 1052358
MSDS Date:09/26/1983
FSC:9150
NIIN:01-198-3829
MSDS Number: BGQKB
Responsible Party
DETROIT, MI 48210-3240
US
Emergency Phone: (313)894-4800
Info Phone: 313-556-1597
Cage: NO193
Contractor
Telephone: 313-556-1597
Cage: 62986
Ingredients
PHOSPHORIC ACID ANHYDRIDE
CAS: 989938-00-0
Fraction By Weight: 20.0%
ALKYL AMINE SALT OF PHOSPHORIC ACID
CAS: 989938-00-1
Fraction By Weight: 20.0%
MINERAL OIL (EXPOSURE REGULATED AS 'OIL MIST')
CAS: 8012-95-1
RTECS: PY8030000
Fraction By Weight: 55.0%
OSHA PEL 5 MG/M3
ACGIH TLV: 5 MG/M3/10 STEL;9192
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:ACUTE:IRRITATING TO EYES,SKIN AND
IRRITATING TO RESPIRATORY TRACT (IN CASE OF INHALATION).
CHRONIC:NOT KNOWN.
Medical Cond Aggravated by Exposure:NO DATA AVAILABLE
First Aid
First Aid:SKIN:WASH WITH SOAP AND WATER. EYES: FLUSH WITH WATER.
INHALED: REMOVE TO FRESH AIR. REMOVE CONTAMINATED CLOTHING.
Fire Fighting
Flash Point:338F,170C,PMCC
Extinguishing Media:CO*2, FOAM, DRY CHEM.
Fire Fighting Procedures:MFR DID NOT SPECIFY
Accidental Release
Spill Release Procedures:SM SPL: TAKE UP WITH SAND, OR OTHER NONCOMB.
ABSORB MATL THEN FLUSH AREA WITH H*20. SM DRY SPL: SHOVEL INTO DRY
CONTRS, THEN FLUSH AREA W/H*20.LG SPLS:DIKE FAR AHEAD OF SPL FOR
LATER DISPOSAL. NO CONT ACT W/SPILLED MATL. STOP LK.ELIM IGN
SOURCES.
Handling
Handling and Storage Precautions:STORE IN COOL,DRY WELL VENTED LOW FIRE
RISK AREA. PROTECT FROM HEAT,SHOCK,FRICTION. KEEP CONTAINERS
CLOSED.
Other Precautions:AVOID PROLONGED OR REPEATED SKIN CONTACT.
Exposure Controls
Ventilation:MECHANICAL (GENERAL) VENTILATION
Protective Gloves:RUBBER/PLASTIC
Eye Protection:CHEM SPLASH GOGGLES
Other Protective Equipment:NORMAL WORK CLOTHING COVERING ARMS & LEGS.
Supplemental Safety and Health
MSDS DATED 09-26-83/
Chemical Properties
HCC:V6
Spec Gravity:0.925
Solubility in Water:INSOLUBLE
Appearance and Odor:DARK COLORED LIQUID
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:TEMPS GREATER THAN 100F
Hazardous Decomposition Products:OXIDES OF CARBON,SULFUR,NITROGEN &
PHOSPHORUS
Disposal
Waste Disposal Methods:KEEP IN COVERED DRUMS,PENDING DISPOSAL. HANDLE &
DISPOSE IN FULL COMPLIANCE WITH ALL APPLICABLE
INTERNATIONAL,FEDERAL,STATE, & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.